Ultravation Progressive Media 91-005 16x25x5 MERV 11 Filter 3 Pack

The Ultravation 91-005 filter is the OEM (original equipment manufacturer) replacement for your system. The manufacturer of your system recommends that you replace your air filter with the filter specifically designed for it. The Ultravation 91-005 is the 16 x 25 x 5 replacement MERV 11 Progressive Media air filter for the following Ultravation whole house air cleaner models:

• Progressive Media Air Cleaner models: 90-031
• Photronic Straight-Through Design Multistage Whole House Air Cleaner Models: 92-024, 92-025, 92-026, 92-028, 92-029, 92-030, 92-115, 92-116, 92-117, 92-118, 92-119, 92-120
• Photronic Support Box Multistage Whole House Air Cleaner Models: 92-010, 92-011, 92-012, 92-133, 92-134, 92-135

Maintenance & Care: REPLACE every 4 to 6 Months to challenging environments with pets that shed, active children, and wall-to-wall carpeted homes or offices. Please refer to your unit's Instruction Manual for instructions on changing your air cleaner's filter.

Filter Dimensions: 15 3/4" x 24 1/4" x 4 3/4"

This package ships with three (3) filters.

How to Change Your Ultravation Filter:

Upgrade to a 91-025 MERV 13 Filter as your best filter to capture the COVID-19 Virus particulate.

 

Why Choose Genuine Ultravation OEM Progressive Media Replacement Air Filters?

• MERV 11 performance (recommend upgrading to MERV13 for COVID-19)
• Low-pressure drop
• Progressive particulate capture for long-life
• 100% Synthetic Fibers
• Stable Media Charge
• High Initial Efficiency
• Thermally Bonded
• Fibers resist shedding
• Media does not absorb moisture
• Continuous fibers
• No chemical binders

The 91-005 replacement filter uses Ultravation Progressive Media filtration with Ultrastrand fiber technology, which meets and exceeds MERV 11 (ASHRAE 52.2) performance standards. Ultravation MERV 11 filters can capture particles as small as .3 microns. The specially shaped surface of an Ultrastrand fiber captures and holds particles far better than the typical round fiber. Ultrastrand fibers carry a permanent electrostatic charge that attracts particles like a magnet to increase capture ability further.

Ultravation Progressive Media design increases fiber density from the upstream to the downstream side, gathering the largest particles in the first part of the filter while progressively smaller particles are captured through the filter. As a result, the media becomes filled edge to edge, providing a very high dirt-holding capacity.

In the past, increased efficiency in particulate capture meant increased air resistance. However, the Ultravation Progressive Media design and UltraStrand-shaped fibers achieve MERV 11 performance with less pressure drop than a typical MERV 8 media filter. This increased performance with less pressure drop means you will get cleaner air in your home without sacrificing the efficiency of your HVAC system. With genuine Ultravation Progressive Media replacement filters, you truly do get more bang for your buck! 

The Ultravation 91-005 replacement filter is also an upgrade for the Trion® Air Bear refill#: 255649-105 and 255649-005.

How to Change the Air Filter on an Untravation Bottom Return Air Handler