- Product label: Abatement Advantage Eligible
Abatement Technologies PRED750 Portable Air Scrubber
Product Details
The job site doesn't give you clean air. The PREDATOR® 750 does.
The Abatement Technologies PREDATOR® 750 (PRED750) is the #1 small portable air scrubber on the market — and for good reason. At just 35 lbs with up to 750 CFM of airflow, it delivers more air cleaning power per pound than anything else in its class. Built for restoration contractors, remediation crews, healthcare construction teams, and abatement professionals who can't afford downtime, underperformance, or equipment that breaks on the third job.
One person. One hand. One carry. That's the Predator.
Built for the Work You're Actually Doing
The PRED750 is engineered for four high-stakes environments:
- Healthcare Construction & ICRA Compliance — Meets stringent infection control requirements for occupied facility renovations
- Critical Environment Protection — Negative pressure containment with zero-bypass cabinet design
- Abatement & Remediation — Mold, asbestos, lead, and hazardous particle control
- Fire, Flood & Water-Loss Restoration — Optional carbon filter handles smoke, odor, and volatile compounds
Why Pros Choose the PRED750
⚡ 750 CFM. 1.9 Amps. Five Units Per Circuit.
Peak airflow of 750 CFM — up to 50% more than comparable scrubbers — at just 1.9 amps of draw. That means you can safely daisy-chain up to 5 PRED750 units on a single 15-amp circuit using the built-in GFCI-protected receptacles. More coverage, fewer circuits, no tripped breakers.
🏗️ A Cabinet Built to Absorb Abuse
The double-wall polyethylene cabinet is rotationally molded from UL94HB flame-retardant resin — the same flammability standard required for cabinets housing energized electrical components. EPA-registered microbial growth inhibitors and UV inhibitors are infused into the resin itself, not painted on. TEFGARD® surface finish decontaminates quickly. Drop it, drag it, stack it — the Predator takes it.
🔬 True HEPA That Actually Stays True
Cheaper scrubbers use filters with an electrostatic charge that degrades during use — especially on water jobs. The PRED750's true HEPA filter maintains or increases its 99.97% efficiency at 0.3 microns over time. That's not a marketing claim — it's the physics of mechanical filtration. Fewer replacements. More consistent protection. Lower annual filter cost.
🚀 One Handle. Perfect Balance. Stack Three High.
The integral ergonomic flip-up lift handle is positioned at the unit's exact center of gravity — one person can hand-carry one or two units without assistance. Stack 3 units for on-site use, or up to 5 for transport and storage. Roll the whole stack on a standard dolly to the next room, next floor, or next job.
🎛️ Zero-Bypass Design. No Air Gets Around the Filter.
The PRED750's cabinet design eliminates bypass leakage — every cubic foot of air pulled in passes through the full filtration stack. This matters in containment environments where a single leak path can compromise the entire zone. NRTL-certified to UL Std. 507 and CAN/CSA Std. #C22.2 No. 113-M1984.
Multi-Stage Filtration — In Order
- Stage 1 — F621: 1" coarse particulate pre-filter. Captures large debris. Change monthly on active jobs.
- Stage 2 — H502: 2" deep pleated particulate filter. Traps medium-sized particles. Protects the HEPA core.
- Optional Stage 2 — VL1002: 2" high-capacity VAPOR-LOCK® carbon filter. Removes gases, VOCs, and odors from fire and flood environments.
- Final Stage — H161606-99: True HEPA filter. 99.97% efficient at 0.3 microns. Rated for 3 years under normal use — longer when pre-filters are changed on schedule.
Pre-filter neglect is the #1 cause of premature HEPA failure. We stock all OEM replacement filters and annual bundles — see below.
Technical Specifications
| Peak Airflow | 750 CFM (High) / 200 CFM (Low) |
| Coverage | 6 ACH @ 6,000–7,500 ft³ |
| Normal Operating Amps | 1.9 A or less |
| Electrical Rating | 110–120 VAC, 60 Hz, 15 A |
| Motorized Impeller | 258W, auto reset, 60 Hz, single phase |
| Daisy-Chain Capacity | Up to 5 units on one 15-amp circuit |
| Weight | 35 lbs (15.88 kg) |
| Dimensions (L × W × H) | 25.5" × 19.5" × 20.5" (64.8 × 49.5 × 52.1 cm) |
| Sound Level @ 5 Feet | 65 dBA (high speed) |
| Cabinet Material | UL94HB Flame-Retardant Polyethylene w/ TEFGARD® Finish |
| Pre-filter Access | Hinged "no tools" access door |
| HEPA Filter Efficiency | 99.97% @ 0.3 microns |
| Stackable | 3 high (use) / 5 high (transport & storage) |
| Cabinet Colors | Custom colors available (minimum quantities apply) |
| Certifications | NRTL Certified — UL Std. 507 & CAN/CSA Std. #C22.2 No. 113-M1984 |
| Patents | US 9,868,082 (Utility) · US D742495 (Design) · CA 156184 (Design) · CA 2,852,880 (Utility) |
Download the Abatement PRED750 Spec Sheet
Keep It Running Right — OEM Filters Available
A PRED750 that runs on expired pre-filters is a PRED750 that burns through HEPA cores ahead of schedule. We carry the complete line of genuine Abatement Technologies OEM replacement filters — the exact parts Abatement ships in the box — with annual bundles that cover your full maintenance schedule in one order.
- PRED750 Annual Complete Filter Bundle — HEPA + 12 pleated + 12 coarse pre-filters
- PRED750 Annual Essential Filter Bundle — HEPA + 12 pleated filters
- PRED750 Annual Convenience Ultra-Pack — HEPA + coarse + pleated + carbon filters
Browse all Abatement Technologies OEM filters and equipment →