The 59P509-06 is manufactured by Airguard for WaterFurnace and is considered by WaterFurnace to be the OEM replacement MERV 11 air filter for all their Geothermal Comfort Systems that use a 30 x 36 x 2 pre-filter. We purchase the 59P509-06 pre-filter directly from WaterFurnace, so you can be confident that it is not a 3rd party knock-off.
The replacement filters used with WaterFurnace units that use a 30 x 36 x 2 pre-filter must use a filter that is a full 30" x 36". If you use a smaller filter such as many of the 29 1/2" x 35 3/4" filters sold by other manufacturers, your filter will not seal properly and you could get unfiltered air leaking around the edge of the filter, this is called bypass. The 59P509-06 MERV 11 air filter is approximately 30" x 36" x 1 3/4" and is the size recommended by WaterFurnace for a proper fit.
Common WaterFurnace Geothermal Heat Pump Models
that use the 59P509-06 30 x 36 x 2 MERV 11 pre-filter:
Single Speed Vertical Units:
Dual Capacity Vertical Units: NDV064, NDV072
Vertical Units: LSV070
Vertical Units: P040, P046, P056, P066
The 59P509-06 is made of 100% synthetic fibers that are needled together and then electro statically charged. The needled fibers create a dense mat that produces a MERV 11 rating and higher mechanical efficiency at a lower air resistance than other pleated filters. For more information on the construction of the 59P509-06 replacement air filter please review the Airguard PowerGuard Air Filter Specifications.
WaterFurnace Premier Series units have an air filter rack that can be set for 1" or 2" when the units are installed. In most situations you will not be able to change your units filter rack size without altering your ductwork, so please make sure your unit’s filter rack is set for 2" filters. If your unit’s filter rack is set for 1" filters, please contact us for a quote on the exact filter you need.
All WaterFurnace units that use a 30 x 36 x 2 air filter, actually use two 18 x 30 x 2 filters stacked. The 59P509-06 filter is made of two 18 x 30 x 2 air filters taped together. If your unit has an "H" channel between its air filters, remove or cut the tape to separate the two filters.
The manufacturer suggested replacement interval is 4 to 6 months, depending upon conditions and lifestyle.
For instructions on how to change your furnace's air filter, please refer to your unit's Owner’s Manual.
This package ships with 4 filters.